Materials

*Many materials listed on the pages below are in stock, while others are simply materials we work with frequently. Some of these materials are not cost-effective to stock, though we have the ability to purchase all of the materials listed in a relatively expedient manner as the need arises. “™” materials are the registered tradenames of their respective owners.

• 2011/2013 ( Rounds )
• 2024 ( Rounds / Flats )
• 6013 ( Plate )
• 6061/6063 ( Rounds / Flats / Angles / Structural Tube / Channel )
• 7075 ( Rounds / Flats )
• 80/20™ Products ( Extrusions )
• ALCA 5™ Plate ( Cast Flats )
• K100S Plate ( Cast Flats )
• T-6 ( Flats )
• Tool & Jig Plate ( Cast Flats )

• SAE64 (Modified) / CDA937 Bronze ( Rounds / Flats )
• SAE65 ( Rounds )
• 280/70C™* Brass ( Flats )
• 205 Nickel Bronze ( Cast Rounds / Cast Flats )
• 260 Cartridge Brass ( Flats )
• 360 Free Machining Brass ( Rounds / Flats / Hex )
• 424 Manganese Bronze ( Rounds )
• 464 “Naval” Brass ( Rounds / Flats )
• SAE841 Oil-Impregnated Bronze ( Flats / Rounds / Tubes )
• SAE954 ( Rounds / Flats / Tubes / Balls )
• SAE959 ( Rounds / Flats )
• CDA510 Phosphor Bronze ( Rounds )
• CDA544 Phosphor Bronze ( Rounds )
• CDA642 ( Rounds )
• CDA651 ( Rounds )
• CDA655 ( Rounds / Hex )
• CDA660 Bronze / SAE932 ( Rounds / Flats / Tubes )
• CDA661 ( Rounds )
• CDA863 ( Rounds / Flats )
• CDA903 “Navy ‘G'” ( Rounds )
• CDA907 ( Rounds )
• CDA916
• CDA936
• CDA937( Rounds / Flats )
• Ampco 8™* Bronze ( Rounds / Flats – Subject To Limited Availability )
• Ampco 18™* Bronze ( Rounds / Flats / Tubes )
• Ampco 21™* Bronze ( Flats )

• 1018 CF ( Rounds / Flats / Hex / DOM & CDS Tube / PG Flats )
• 1020 / A-36 HF( Rounds / Flats / Angle / Channel / Square & Structural Tube )
• 1026 HF ( Tube )
• 1040 HF ( Pipe, Tube & Schedule Tube )
• 1044 HF ( Flats )
• 1045 CF/HF ( Rounds / Hex / TG&P Rounds )
• 1056/1060 ( TG&P & Hardened Rounds)
• 1060 DCF/HF ( Flats )
• 1080/1085 CF ( Rounds / Wire )
• 1095 CF ( Flats )
• 1117 CF ( Rounds )
• 11L17 CF ( Rounds )
• 1141 CF ( Rounds )
• 1144 CF ( Rounds )
• 1144 Stressproof™ CF( Rounds / TG&P Rounds )
• 12L14 CF ( Rounds / Squares / Large Hex )
• 1214SA CF ( Rounds )
• 1215 CF ( Rounds / TG&P Rounds )
• Fatigueproof™ ( Rounds )
• Freemax 15™ & Freemax 45™ ( Plate )
• All Schedule Tubing

• 60 Ductile ( Flats / Rounds )
• 65 Ductile ( Flats )
• 80 Ductile ( Flats / Rounds )
• 100 Ductile ( Cast Flats / Rounds )
• 201 Type 1 ( Rounds / Flats )
• Class 40 Gray ( Rounds / Flats / Tube )
• G-1A ( Rounds / Flats )
• G-2 ( Rounds / Flats / Tube )
• Ni-Resist™ ( Rounds / Flats )

• C101 ( Rounds / Flats )
• C110 Electrolytic ( Rounds / Flats )
• C145 ( Rounds / Flats )
• C150 Zirconium ( Rounds / Flats )
• C157 60 Aluminum Oxide ( Rounds / Flats )
• C162 Cadmium ( Rounds / Flats )
• C172 Beryllium – Cannot Be Machined At SRM
• C175 10 Beryllium – Cannot Be Machined At SRM
• C180 Nickel Silicon Chromium ( Rounds / Flats )
• C181 50 Chromium Zirconium ( Rounds / Flats )
• C182 Chromium ( Rounds / Flats )
• Class 1 Zirconium ( Rounds / Flats )
• Class 1 Cadmium ( Rounds / Flats )
• Class 2 Chromium ( Rounds / Flats )
• Class 2 Chromium Zirconium ( Rounds / Flats )
• Class 3 Nickel Beryllium – Cannot Be Machined At SRM
• Class 3 Nickel Silicon Chromium ( Rounds / Flats )
• Class 4 Beryllium – Cannot Be Machined At SRM
• Class 10 Copper Tungsten
• Class 11 Copper Tungsten
• Class 12 Copper Tungsten
• Class 13 Tungsten
• Class 14 Molybdenum
• Class 20 Aluminum Oxide

* Please note that we may not be able to accomodate every need or request in these materials, but we promise to review each item submitted for quotation to our fullest ability.

** We currently do not machine any Beryllium Copper due to its toxic nature

• 254 SMO
• 400
• 405
• 600
• 601
• 625
• 718
• 800H/HT
• 825
• 3310
• 4130 Annealed
• 4130 Pre-Hard
• 4140 Annealed
• 4140 Pre-Hard
• 4142 Annealed
• 4142 Pre-Hard
• 4150 Annealed
• 4150 Pre-Hard
• 4340 Annealed
• 4340 Pre-Hard
• 4750 Pre-Hard
• 8620
• 9310
• E52100
• A286 ( All Varities)
• AR400
• B-2
• B-3
• C22
• C276
• CPM ( Carpenter Project Metals )™
• ETD 150
• Hardox 400™ ( Plate )
• Hastelloy™
• Hastelloy B-2™
• Hastelloy B-3™
• Hastelloy C-22™
• Hastelloy C-276™
• Hastelloy X™
• Incoloy 800H/800HT™
• Incoloy 825™
• Inconel 600™
• Inconel 601™
• Inconel 625™
• Inconel 718™
• Inconel HX™
• K-500
• Monel K-100™
• Monel 400™
• Nitrolloy™ 135 Mod
• Nitronic™
• Nitronic™ 60
• P-20 Mold Steel
• Titanium – Grade 2
• Titanium – Grade 5
• Titanium – Grade 6
• Waspalloy™
• X

* Please note that we may not be able to accomodate every need or request in these materials, but we promise to review each item submitted for quotation to our fullest ability.

• 80/20™ Products
• Bimba™ Products
• Boston™ Products
• Bowman™ Products
• Browning™ Products
• Bunting™ Products
• Carbide
• Carr-Lane™ Products
• Danly™ Products
• Dodge™ Products
• E.L. Simeth™ Wear Plate
• Essentra™ Products
• Fastenal™ Products
• Felt
• Grainger™ Products
• Gortite™ Wiper Stock
• Hennig™ Wiper Stock
• Holo-Krome™ Products
• Jergens™ Products
• Kop-Flex™ Products
• Lead
• Lincoln™ Products
• Lovejoy™ Products
• Martin™ Products
• McMaster-Carr™ Products
• Morse™ Products
• Nook™ Threaded Rod
• Parker-Hannefin™ Products
• PBC Linear (Pacific Bearing)™ Shafting
• PIC™ Shafting
• Reid™ Products
• Rexroth Star™ Products
• SKF™ Products
• Spring Steel
• Teco™ Products
• Thompson™ Rod & Shafting
• Threaded Rod
• Van Gorp™ Products
• Woods™ Products

Modifications To Purchased:

• Accordian Covers
• Air Cylinders
• Angle Plate Blanks
• Balls
• Bearings
• Bolts
• Bushings
• Castings
• Covers
• Fabrications
• Fasteners
• Gears
• Handwheels
• Linear Rails
• Linear Shafts
• Linear Slides
• Lock Nuts
• Nuts
• O.E.M. Components
• Pillow Blocks
• Pulleys
• Screws
• Sheaves
• Sprockets
• Way Covers
• Weldments
• Wipers

• ABS ( Flats )
• Acetal Homopolymer ( Rounds / Flats / Tube )
• Acetron™ ( Rounds / Flats / Tube )
• Acetron GP™ ( Rounds / Flats / Tube )
• Acrylic ( Rounds / Flats / Tube )
• Alucobond™ ( Flats )
• Celtec™ ( Flats )
• Coroplast™ ( Flats )
• CPVC ( Rounds / Flats )
• Delrin™ – White & Black / Filled & Unfilled ( Rounds / Flats )
• Delrin AF™ – Brown ( Rounds / Flats )
• Dibond™ ( Flats )
• Duraplast™ ( Flats )
• Duratron PAI™ ( Rounds / Flats )
• Duratron PBI™ ( Rounds / Flats )
• Duratron PEI™ ( Rounds / Flats )
• Ertalyte™ ( Rounds / Flats )
• Ertalyte PET-P™ ( Rounds / Flats )
• Ertalyte TX™ ( Rounds / Flats )
• Excelon™ ( Tubing )
• Extren™ ( Flats )
• FEP Mylar ( Flats / Rounds / Tubing )
• FibroFlex™ – Yellow, Green & Red ( Rounds / Flats / Tube / Molded )
• Fleurosint™ ( Rounds / Flats / Tube )
• Fluran™ ( Tubing )
• Foam-X™ ( Flats )
• Fomecor™ ( Flats )
• FormPlast™ ( Flats )
• G-10 Phenolic ( Rounds / Flats )
• Garolite™ ( Rounds )
• Garolite™ LE ( Rounds )
• Gatorfoam™ ( Flats )
• HDPE (High-Density Polyethylene) ( Flats / Rounds )
• Hi-Impact Styrene™ ( Flats )
• HS Armor™ ( Flats )
• Hydex™ ( Rounds / Flats )
• Hydex 4101™ ( Rounds / Flats )
• Hydex 4301™ ( Rounds / Flats )
• Hydex 4320K™ ( Rounds / Flats )
• Hydex 6101™ ( Rounds / Flats )
• Hydex 6120™ ( Rounds / Flats )
• Hydex 6201™ ( Rounds / Flats )
• Hygard™ ( Flats )
• Hyzod™ ( Flats )
• Implex™ ( Flats )
• Insite™ ( Flats )
• Interpro™ ( Flats )
• Kel-F™ ( Rounds / Flats )
• Kevlar™-Filled Nylon [Hydlar Z™] ( Flats / Rounds )
• King ColorBoard™ ( Flats )
• King ColorCore™ ( Flats )
• King CuttingBoard™ ( Flats )
• King Hy-Pact UH™ ( Flats )
• King Hy-Pact VH™ ( Flats )
• King PlastiBal™ ( Flats )
• King Starboard™ ( Flats )
• K-Prene™ ( Rounds / Flats / Tube )
• Kydex™ ( Flats )
• Kynar™ ( Rounds / Flats / Tube )
• LDPE (Low-Density Polyethylene) ( Flats / Rounds )
• Lexan™ ( Flats )
• Makrolon™ ( Flats )
• Makrolon AR™ ( Flats )
• MC901™ ( Flats / Rounds / Tube )
• MC907™ ( Flats / Rounds / Tube )
• Micarta™ ( Rounds / Flats / Tube )
• Neoprene™ ( Sheet )
• Norplex™ ( Flats / Rounds / Tube )
• Norprene™ ( Tubing )
• Noryl™ ( Flats / Rounds )
• NT 80™ ( Tubing )
• Nycast 6PA™ ( Flats / Rounds / Tube )
• Nycast Blue™ ( Flats / Rounds / Tube )
• Nycast MOS2™ ( Flats / Rounds / Tube )
• Nycast CP™ ( Flats / Rounds / Tube )
• Nycast XHA™ ( Flats / Rounds / Tube )
• Nycast MSX™ ( Flats / Rounds / Tube )
• Nycast GX/RX™ ( Flats / Rounds / Tube )
• Nylasteel™ ( Rounds )
• Nylatron™ ( Rounds / Flats / Tube)
• Nylatron 703XL™ ( Rounds / Flats / Tube)
• Nylatron GS™ ( Flats )
• Nylatron GSM™ ( Rounds / Flats / Tube)
• Nylatron GSM Blue™ ( Rounds / Flats / Tube)
• Nylatron LFG™ ( Rounds / Flats / Tube)
• Nylatron LIG™ ( Rounds / Flats / Tube)
• Nylatron NSM™ ( Rounds / Flats / Tube)
• Nylon™ ( Rounds / Flats )
• Nylon™ 101 ( Rounds )
• Nylon™ 6/6 ( Rounds / Flats )
• Nylon™ 6/12 ( Rounds / Flats )
• Nylon™ MDS ( Rounds / Flats )
• Nymetal™ ( Rounds )
• Ny-Oil™ – Standard & Food Grade ( Rounds / Flats )
• Optix™ ( Flats )
• Optix LD™ ( Flats )
• PEEK ( Rounds / Flats )
• PETG ( Flats )
• Phenolic – Linen, Paper & Canvas ( Rounds & Flats )
• Plexiglass ( Flats / Rounds / Tube )
• Polycarbonate™ ( Flats / Rounds / Tube )
• Polyethylene ( Rounds )
• Polypenco™ ( Rounds / Flats / Tube )
• Polypropylene ( Rounds )
• Polystone™ ( Rounds / Flats / Tube )
• Polyurethane ( Rounds )
• PTFE ( Flats / Rounds / Tube )
• PVC ( Flats / Rounds )
• RF-45 ( Flats )
• Rexolite™ ( Rounds / Flats / Tube)
• Rulon™ – Maroon & Gold ( Rounds )
• Ryno™ ( Flats )
• Sanalite™ ( Flats )
• Semitron™ ( Rounds / Flats )
• Sintra™ ( Flats )
• Spauldite™ ( Rounds / Tubing )
• Spektar™ ( Flats )
• Techtron PPS™ ( Rounds / Flats / Tube )
• Teflon™ – Mechanical & Virgin ( Rounds / Flats )
• Textolite™ ( Rounds )
• Tivar 88 & 88-2™ ( Flats )
• Torlon PAI™ ( Rounds / Flats )
• Turcite™ ( Rounds )
• Tygon™ ( Tubing )
• Tygothane™ ( Tubing )
• UHMW – White / Black / Grey / Clear / Blue ( Flats / Rounds )
• Ultem PEI™ ( Rounds / Flats )
• Ultraboard™ ( Flats )
• Urethane ( Rounds / Flats )
• Vesconite™ ( Rounds )
• Vesconite™ HiLube™ ( Rounds )
• Vespel™ ( Flats / Rounds / Tube )
• Vivak™ ( Flats )

* Please note that we may not be able to accomodate every need or request in these materials, but we promise to review each item submitted for quotation to our fullest ability.

• 15-5 PH ( Rounds )
• 17-4 PH H900 Condition ( Flats / Rounds )
• 17-4 PH H1150 Condition ( Flats / Rounds )
• 18-8 PH ( Threaded Rod )
• 253 MA™ ( Rounds /Flats )
• 254 SMO™ ( Rounds /Flats )
• 302 ( Wire )
• 303 ( Rounds / G&P Rounds / Flats / Tube )
• 304L & H ( Rounds / Flats / Standard & Schedule Tube )
• 309/S ( Rounds /Flats )
• 310/S ( Rounds /Flats )
• 316/316L & H ( Rounds / Flats To 5″ Thick / Standard & Schedule Tube )
• 317/317L ( Rounds / Flats )
• 321 ( Rounds /Flats )
• 329 ( Rounds – Subject To Limited Availability )
• 330 ( Rounds /Flats )
• RA330™ ( Rounds / Flats )
• 333 ( Rounds /Flats )
• 347 ( Rounds /Flats )
• 409 ( Rounds /Flats )
• 410 ( Rounds /Flats )
• 416 ( Rounds )
• 420 ( Rounds /Flats )
• 430 ( Rounds / Flats )
• 440 ( Rounds /Flats )
• A268 ( Rounds )
• 2205 Avesta Duplex™ ( Rounds )
• 2304 Duplex™ ( Rounds /Flats )
• 2507 Super Duplex™ ( Rounds /Flats )
• AL-6XN™ ( Rounds /Flats )
• Alloy 20 ( Rounds /Flats )
• Carpenter Project Metals™ ( Rounds )
• LDX-2101™ ( Rounds /Flats )
• Zeron 100™ ( Rounds /Flats )
• All Schedule Tubing

* Please note that we may not be able to accomodate every need or request in these materials, but we promise to review each item submitted for quotation to our fullest ability.

• A-2 Decarb-Free & Regular ( Rounds / Flats / PG Flats / Drill Rod )
• A-6 ( Rounds / Flats )
• A-10 [Graph-Air™] ( Flats )
• D-2 ( Flats / Rounds )
• DC-53 ( Flats / Rounds )
• DRM1 ( Flats / Rounds )
• DRM2 ( Flats / Rounds )
• DRM3 ( Flats / Rounds )
• H-13 ( Rounds / Flats )
• L-6 ( Flats / Rounds )
• M-2 ( Rounds / Flats )
• M-3 ( Rounds )
• M-4 ( Rounds )
• M-13 ( Rounds )
• M-42 ( Rounds )
• O-1 ( Rounds / Flats / PG Flats / Drill Rod )
• O-6 [Graph-Mo™] ( Rounds )
• P-20 ( Flats / Rounds )
• S-5 ( Rounds )
• S-7 ( Flats / Rounds )
• S-7 ESR ( Rounds )
• T-15 ( Flats / Rounds )
• Viscount 44™ ( Flats / Rounds )
• W-1 ( Rounds / Drill Rod )

* Please note that we may not be able to accomodate every need or request in these materials, but we promise to review each item submitted for quotation to our fullest ability.